Overhead Crane Inspection Barry County, MO
Overhead crane inspection Barry County, MO. Because of the weight and overall size of the objects that are transported by overhead cranes, daily usage can lead to decline or, worse, a dangerous breakdown that puts you, your team, or your company at risk. Which is precisely why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not simply keep them working at peak performance, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Barry County, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even an entire overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most challenging manufacturing requirements in Barry County, MO and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Barry County, MO and Midwest Businesses By Engineered Lifting Systems
Our Barry County, MO overhead crane company is experienced in performing a variety of crane services, including full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. Inspection frequency is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Barry County, MO and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Barry County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Barry County, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in optimal performance, which is where our technicians excel!
Frequent inspections in Barry County, MO and throughout the Midwest include examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Barry County, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Barry County, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you neglect to do these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA were to perform an on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Barry County, MO and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane should be inspected to ensure compliance before the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even operate the crane system.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to ensure that all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report on the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us right away or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Barry County, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Barry County, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane today. Once we are finished, you can get back at it with the peace of mind knowing your system meets government regulations and your crew is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Barry County, MO and Midwest companies with OSHA-compliant crane services of any type. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.