Overhead Crane Inspection Franklin County, MO
Overhead crane inspection Franklin County, MO. Due to the size and weight of the objects that are lifted by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous deficiency that puts you, your team, or your company at risk. This is precisely the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Franklin County, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or even an entire overhead crane brake rebuild, our primary goal since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most rigorous manufacturing standards in Franklin County, MO and throughout the Midwest.
For more information regarding overhead crane inspection and to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Franklin County, MO and Midwest Businesses By Engineered Lifting Systems
Our Franklin County, MO overhead crane company is experienced in performing a variety of crane services, including full inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry standards. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Franklin County, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Franklin County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Franklin County, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as often as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and damage the components and structure. Operational and visual inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspections in Franklin County, MO and throughout the Midwest include checking the following list of items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Franklin County, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Franklin County, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you neglect to meet these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs an on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or contact us online.
Initial Overhead Crane Inspections For New Equipment in Franklin County, MO and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane is required to be inspected to ensure compliance before the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you are able to even use the crane system.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to ensure that all working components have been tested and properly installed. These trained technicians need to provide a full report on the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Contact us today or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Franklin County, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Franklin County, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system now. Once we complete the inspection, you can get back to work with the peace of mind knowing your overhead crane meets government regulations and your team is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Franklin County, MO and Midwest businesses with OSHA-compliant crane services of any type, since that first day in 2004. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right away at 866-756-1200 or 866-756-1202.