Overhead Crane Inspection Jefferson City, MO
Overhead crane inspection Jefferson City, MO. Due to the size and weight of the objects that are transported by overhead cranes, daily operation can lead to decline or, worse, a dangerous deficiency that puts your employees, your company, and your processes at risk. This is exactly the reason why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them working at peak performance, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Jefferson City, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even an entire overhead crane brake rebuild, our primary objective since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most challenging manufacturing requirements in Jefferson City, MO and throughout the Midwest.
For more information regarding overhead crane inspection and to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Jefferson City, MO and Midwest Businesses By Engineered Lifting Systems
Our Jefferson City, MO overhead crane company is specialized in performing all types of crane services, such as comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Jefferson City, MO and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Jefferson City, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Jefferson City, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as often as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and damage the structure and components. Visual and operational inspections keep the crane in optimal performance, which is where we come in!
Frequent inspections in Jefferson City, MO and throughout the Midwest include looking over the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Jefferson City, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Jefferson City, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you fail to do these crane inspection requisites, not only will your efficiency suffer, it could lead to costly fines if OSHA performs an on-site audit. Give us a call now at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Jefferson City, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance prior to the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even use the crane system.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians must provide a written report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us now or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Jefferson City, MO area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Jefferson City, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system now. Once we are finished, you can get back to work with the peace of mind knowing your machine is up to government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Jefferson City, MO and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right now at 866-756-1200 or 866-756-1202.