Troy, MO

Overhead Crane Inspection Troy, MO

Overhead crane inspection Troy, MO. Because of the weight and overall size of the objects that are transported by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous deficiency that puts your employees, your company, and your processes at risk. This is exactly the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them operating at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Troy, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our main goal since day one in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most rigorous manufacturing standards in Troy, MO and throughout the Midwest.

Contact us online or call our team at 866-756-1200 or 866-756-1202 for more information regarding overhead crane inspection and to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.

Overhead Crane Inspection Services For Troy, MO and Midwest Businesses By Engineered Lifting Systems

Our Troy, MO overhead crane company is experienced in performing many different kinds of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. Inspection frequency is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:

• Occupational Safety and Health Administration (OSHA)
• American Society of Mechanical Engineers (ASME)
• Construction Management Association of America (CMAA)

Overhead crane inspection services offered by Engineered Lifting Systems in Troy, MO and throughout the Midwest include:

Along with being the overhead crane inspection company of choice in and around Troy, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:

• Overhead Crane Repair
• Overhead Crane Brakes
• Overhead Crane Service
• Overhead Crane Automation
• Electric Hoists

Overhead Crane Inspection Checklist | Frequent Inspections in Troy, MO and Throughout the Midwest

Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and wreak havoc on the components and structure. Operational and visual inspections keep the crane in optimal operating condition, which is where our technicians excel!

Frequent inspections in Troy, MO and throughout the Midwest include looking over the following list of items:

• Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
• Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
• Functional operating mechanisms – Our Troy, MO and Midwest specialists look for maladjustment.
• Air or hydraulic systems – We check for leakage or deterioration in tanks, lines, drain pumps, valves, etc.
• Hooks – We look for deformation, cracks, etc.
• Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
• Hoist trolley and bridge – We run through complete motions.
• Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
• Safety – Our specialists test safety devices and check that warning and other safety labels are present and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Troy, MO and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspection includes checking the following items:

• Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
• Loose rivets or bolts
• Worn or cracked drums and sheaves
• Wind, load, and other indicators over their full range
• Excessive wear on ratchets, pawls, linings, and brake system parts
• Excessive chain stretch or wear on chain drive sprockets
• Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
• Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
• Corroded, cracked, or deformed members

If you neglect to meet these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs a sudden, on-site audit. Call us today at 866-756-1200 or 866-756-1202 or contact us online.

Initial Overhead Crane Inspections For New Equipment in Troy, MO and Throughout the Midwest

Any new, reinstalled, modified, altered, repaired, or updated crane is required to be inspected to ensure compliance prior to the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even use the overhead crane.

These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report on the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in place. Contact us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Troy, MO area or elsewhere throughout the Midwest.

Contact the Leading Overhead Crane Inspectors in Troy, MO, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors check out your system now. Once we complete the inspection, you can get back to work with the peace of mind knowing your system is up to government regulations and your crew is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.

Engineered Lifting Systems has been providing Troy, MO and Midwest companies with OSHA-compliant crane services of any type, since that first day back in 2004. To get started on a quote for overhead crane inspection, contact us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.